What does your floor really cost?

HOW THE CALCULATOR WORKS

What goes into the epoxy flooring cost estimate

Five inputs set the range. Every number on this page comes from the same pricing table the calculator runs on, so what you read here is what it uses.

1. 1

   Floor type

   Floor coatings (epoxy, polyaspartic, polished concrete, microcement), wood and vinyl, or tile and stone. Each family has its own price table and its own prep list.

2. 2

   Size

   Pick a preset or type length and width (1 to 500 ft each). Presets: 1-car garage 240 sqft, 2-car garage 400 sqft, 2.5-car 500 sqft, 3-car 720 sqft, Basement 600 sqft, Patio / pool deck 400 sqft, Commercial bay 1,200 sqft, Warehouse 5,000 sqft. Coverage planning adds a 10% allowance on top.

3. 3

   System

   Each system has a base installed price per square foot that already assumes ordinary prep on a sound surface. The full low and high range for every system is in the table further down this page.

4. 4

   Slab condition

   A clean, fully cured slab adds nothing. Each problem you tick adds its own per-sqft prep cost: Light cleaning + degrease: $0.50–$1/sqft; Patching cracks, joints, pitting: $1–$2/sqft; Extra grinding: $1.50–$3/sqft; Old coating removal: $2–$4/sqft. Old coating removal already includes the grinding, so the two are not counted twice.

5. 5

   ZIP code (optional)

   A rough regional adjustment from the first digit of your ZIP: about 5% below the national range for ZIPs like Florida, Georgia, and Texas, up to 20% above it for the New York metro and the West Coast. Leave it blank to see the national range.

The range is (system price + prep) × square feet × the regional factor. Small jobs are then raised to a project minimum ($2,500 for coatings, $1,000 for wood and vinyl, $750 for tile), because setup, travel, and crew time don't shrink with the floor. It is a budget range, not a quote.

WHY PRICES VARY

Surface prep is the price.

Most homeowners think the cost of a floor is the material. It isn't — it's the prep. Base installed pricing includes ordinary preparation for a sound surface. Old paint, failed coatings, cracks, moisture issues, existing tile, or a wavy subfloor can require added removal, repair, leveling, or mitigation before anything new goes down.

• Light cleaning, vacuuming, degrease

  Mechanical scrub, oil-spot treatment, dust extraction. Standard on every job, across every flooring family.

• Patching cracks, joints, surface defects

  Polyurea or epoxy fill for coatings; cementitious leveler for wood and tile. Required if you want a smooth, dimensionally accurate install.

• Mechanical profiling or substrate prep

  For coatings, ordinary mechanical profiling is part of a professional installation. Sealed, painted, densified, or damaged slabs can require additional grinding or removal. Wood and tile may require separate flattening and repair.

• Removing existing flooring or coating

  Mechanical removal of failed paint, peeling epoxy, worn vinyl, old tile, or carpet tack strips. The slowest and most expensive prep line on most jobs.

FLOORING SYSTEMS COMPARED

How much does each system cost?

Base installed planning ranges for every system in the calculator, before added prep or project minimums. National ranges were reviewed in 2026; actual quotes vary by region, substrate condition, layout, and product line. The "2-car garage" reference column assumes 400 sqft of finished area.

FREQUENTLY ASKED

Questions homeowners ask.